All project planning can be done thinking of Scope, Quality, and Cost. The Architect must retain the right to determine the project’s level of quality in order to assure the […]
Definitions and Notes Deed Restriction: Anything that reduces (or restricts) the deed. A covenant is a type of deed restriction, because it imposes restrictions/rules on the deed. Covenant Covenant: Literally […]
Given the complexities of the construction industry, and the increasing ability for mistakes to happen, many Architects have developed methods to manage quality. A lot of Architects and designers will […]
Trademark & Copyright Masterformat is a registered trademark of the Construction Specialties Institute (CSI). Visit the CSI website for more information. MasterFormat is covered by copyright. CSI Masterformat The CSI […]
Pitch PITCH is the ratio of RISE to RUN. Pitch is also considered the slope RATIO. Rise is given first, and then run. Note this is different from (X, Y) […]
Introduction & Rules of Thumb Roofs, when pitched should be (4:12) slope or greater. Pitched roofs generally have fewer problems than “flat” roofs. All roofs, decks and other flat surfaces […]
Lumber for rough carpentry is referred to by its nominal dimension size, such as 2 x 4. This 2 x 4 refers to 2” x 4” for the dimension the […]
